manualshive.com logo in svg

Fujitsu Tablet DOCK ST5100 Series, Technical Reference Manual

Share
Download
Fujitsu Tablet DOCK ST5100 Series Technical Reference Manual Download Page 48

Audio Jacks

43

Audio Jacks

4

All audio jacks on the Stylistic ST5100 Tablet PC are 
stereo mini jacks. Some audio functions on the Tablet 
PC are disabled when audio jacks are used. Table 4-6 
shows which audio inputs are disabled when inputs 
on the Tablet PC and Tablet Dock are used (enabled). 
Table 4-7 shows which audio outputs are disabled 

when outputs on the Tablet PC and Tablet Dock are 
used. Note that using one of the jacks on the system, 
the other system device is disabled (e.g., when an 
external microphone is used, the internal microphone 
is disabled).

“NA” indicates that the condition does not apply. (The condition has no effect on the given input.) 

“NA” indicates that the condition does not apply. (The condition has no effect on the given output.) 

Table 4-6.  Active Audio Inputs 

Input Activity

Tablet PC 

Tablet Dock

Microphone 

(built-in)

Microphone 

Input Jack

Line Input Jack

Microphone On (microphone built into Tablet PC) 

Enabled

Plug not inserted

NA

Tablet PC Microphone jack used 

 

(external microphone connected) 

Disabled

Enabled

NA

Table 4-7.  Active Audio Outputs 

Output Activity

Tablet PC 

Tablet Dock

Speaker (built-in)

Headphone Jack

Line Output Jack

Speaker On (speaker built into Tablet PC) 

Enabled

Plug not inserted

NA

Tablet PC Headphone jack used 

 

(external headphone connected) 

Disabled

Enabled

NA

Tablet Dock Line Output jack used

NA

NA

Enabled

Summary of Contents for Tablet DOCK ST5100 Series

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands