manualshive.com logo in svg

Fujitsu Tablet DOCK ST5100 Series, Technical Reference Manual

Share
Download
Fujitsu Tablet DOCK ST5100 Series Technical Reference Manual Download Page 23

BIOS Setup Utility

18

USB Features Submenu

2

Options for the USB Features submenu are given in 

Table 2-8

. 

Table 2-9.  USB Features Submenu Options

Menu Field

Options

Default

Description

Legacy USB 
Support:

• Disabled
• Enabled

[Enabled]

This option enables or disables Legacy USB emulation. 

When [Disabled] is selected, Legacy USB support is disabled.

When [Enabled] is selected, Legacy USB support is enabled, and certain 
USB devices (such as CD-ROMs and keyboards) can be used without a 
USB-aware operating system.

SCSI SubClass 
Support:

• Disabled
• Enabled

[Enabled]

This option enables or disables support for USB devices that belong to the 
SCSI subclass in the Mass Storage class (e.g., USB CD-ROM). Note that 
this option is visible but disabled if Legacy USB Support is disabled.

When [Disabled] is selected, the feature is disabled.

When [Enabled] is selected, USB devices that belong to the SCSI subclass in 
the Mass Storage class can be used. Note that enabling this feature could 
cause the system to hang during POST, depending upon the device that is 
connected

F1

 Help

ESC

 Exit

Select Item

Select Menu

   - 

Enter

F9 

Setup Defaults

F10

  Save and Exit

Change Values

Select   Sub-Menu

▲

Item Specific Help

PhoenixBIOS Setup Utility

[Disabled]

The feature is disabled.

[Enabled]

Legacy USB Emulation

is enabled and USB

devices are available

without USB aware OS.

USB Features

Legacy USB Support:       

 

     

[Enabled]

   

SCSI SubClass Support:    [Enabled]

    

 

     

Exit Submenu

Space

Summary of Contents for Tablet DOCK ST5100 Series

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands