background image

ii

IMPORTANT SAFETY 

INSTRUCTIONS

Read these instructions carefully. Save these 
instructions for future reference.
Follow all warnings and instructions marked 

on the product.
Unplug  this  product  from  the  wall  outlet 

before cleaning. Do not use liquid cleaners 

or aerosol cleaners. Use a damp cloth for 

cleaning.
Do not use this product near water.
Do not place this product on an unstable 

cart, stand or table. The product may drop, 

causing serious damage to the product.
Slots and openings in the cabinet and the 

back or bottom are provided for ventilation; 

to ensure reliable operation of the product 

and to protect it from overheating, these 

openings must not be blocked or covered. 

The openings should never be blocked by 

placing the product on a bed, sofa, rug or 

other similar surface. This product should 

never  be  placed  near  or  over  a  radiator 

or heat register or in a built-in installation 

unless proper ventilation is provided. 
This product should be operated from the 

type  of  power  indicated  on  the  marking 

label. If you are not sure of the type of power 

available, consult your dealer or local power 

company. 
Do not allow anything to rest on the power 

cord.  Do  not  locate  this  product  where 

persons will walk on the cord. 

1.

2.

3.

4.
5.

6.

7.

8.

If an extension cord is used with this product, 

make sure that the total ampere rating of the 

equipment plugged into the extension cord 

does not exceed the extension cord ampere 

rating. Also make sure that the total rating of 

all products pugged into the wall outlet does 

not exceed 15 amperes.
Never  push  objects  of  any  kind  into  this 

product through cabinet slots as they may 

touch dangerous voltage points that could 

result in a fire or electric shock. Never spill 

liquid of any kind on the product.
Do  not  attempt  to  service  this  product 

yourself,  as  opening  or  removing  covers 

may expose you to dangerous voltage points 

or other risks. Refer all servicing to qualified 

service personnel.
Unplug this product from the wall outlet and 

refer servicing to qualified service personnel 

under the following conditions:

When the power cord or plug is damaged 

or frayed. 

If liquid has been spilled into the product. 
If the product has been exposed to rain or 

water.

If the product dose not operate normally 

when  the  operating  instructions  are 

followed. Adjust only those controls that 

are covered by the operating instructions 

since improper adjustment of other controls 

may result in damage and will often require 

extensive work by a qualified technician to 

restore the product to normal condition. 

If the product has been dropped or the 

cabinet has been damaged.

If the product exhibits a distinct change in 

performance, indicating a need for service.   

9.

10.

11.

12.

a.

b.

c.

d.

e.

f.

Summary of Contents for STYLISTIC Q737





























Reviews: