Fujitsu Stylistic 3500, Technical Reference Manual

Page: 32 / 110

BIOS Setup 22
Standby Timeout Off
1 Minute
2 Minutes
4 Minutes
6 Minutes
8 Minutes
12 Minutes
16 Minutes Standby Mode turns off various devices in the system, including
the screen and the CPU until you start using the computer again.
Select the period of time the system should be inactive before it
automatically enters standby mode. When in standby mode, some
system components, including the display, are turned off to
conserve battery power. Select Off to disable the Standby Mode
Timeout feature.
Auto Suspend Timeout Off
5 Minutes
10 Minutes
15 Minutes
20 Minutes
30 Minutes
40 Minutes
60 Minutes Determines the amount of time elapsed with no system activity
before system operation is suspended automatically.
Suspend Mode Suspend
Save To Disk Determines the suspend mode used when you press the Suspend/
Resume button or when the Suspend Mode Timeout expires.
Selecting [Suspend] also allows you to configure the Save-To-Disk
Timeout option.
Note: You must choose [Suspend] to use the Resume On Modem
Ring and Resume On Time options. If [Save To Disk] is selected,
and either Resume On Modem Ring or Resume On Time are
enabled, the system will suspend to RAM and won’t save to disk.
Auto Save-To-Disk Off
After 1 Hour Determines whether the system automatically performs a
save-to-disk operation after 1 hour in Suspend mode. To use this
feature, the Suspend Mode option must be set to [Suspend].
Resume On Modem Ring Off
On Select [On] to configure the system to resume operation when an
incoming call is detected by your modem.
This feature will detect a modem ring on the built-in modem, a
modem installed in a PC Card slot, or an external modem
connected to a serial port; however, implementation of the ring
indicator function differs between modem vendors, so this feature
may not be supported by some third-party modems.
To use this feature, the Suspend Mode option must be set to
[Suspend]. If [Save To Disk] is selected, and Resume On Modem
Ring is On, the system will suspend to RAM and won’t save to disk.
Resume On Time Off
On Select [On] to configure your system to resume operation at the
time of day specified in the Resume Time field.
To use this feature, the Suspend Mode option must be set to
[Suspend]. If [Save To Disk] is selected, and Resume On Time is
On, the system will suspend to RAM and won’t save to disk.
Resume Time 00:00:00 Determines time of day system will resume when the Resume On
Time option is On. Enter the time of day in HH:MM:SS format.
Note: system uses a 24-hour clock.
Advanced Features
Submenu Select this submenu to further refine power management BIOS
options. See Table 3-15 for more information.
Table 3-14. BIOS Setup Power Savings Options (Continued)
Option Settings Description