![background image](http://html.mh-extra.com/html/fujitsu/sk-96380-120pmc/sk-96380-120pmc_user-manual_20667029.webp)
SK-96380-120PMC User Guide
Chapter 5 Programming the internal Flash memory
© Fujitsu Microelectronics Europe GmbH
- 29 -
UG-960019-11
ON
OFF
DIP-Switch S1
(RUN Mode)
MD0 MD1 MD2 nc
1
2
3
4
4) After programming the Flash-device, switch off the power supply and set back the
mode according to the usage of the application, e.g.:
5) Power on the board. The user application is started directly.
5.2 Synchronous
Mode
In order to program the Flash-ROM synchronously special third-party soft- and hardware has
to be used, e.g. GALEP-4 from
www.conitec.de
. This tool is not available for free.
A dedicated Flash programming socket (X4) is provided on the evaluation-board for direct
connection to this programmer.
X4: Flash programming socket
Figure 5-1: Flash Programming Socket
Note:
Please open the jumpers JP37 (SIN2) and JP39 (SOT2) in order to avoid that the
synchronous programming tool drives against the on-board RS232 transceiver!
n/c 1
MD0 3
RST 5
SOT2 7
VCC 9
2 n/c
4 n/c
6 SIN2
8 SCK2
10 GND