SK-91465X-100PMC User Guide
Chapter 4 Programming the internal Flash
UG-910056-11
- 24 -
© Fujitsu Microelectronics Europe GmbH
4 Programming the internal Flash
All Flash devices have an internal bootloader for asynchronous as well as synchronous
Flash-programming:
<
asynchronous-serial Flash-programming via X6 (UART A)
<
synchronous-serial Flash-programming via J4
4.1 Asynchronous Mode
To use the asynchronous Flash programming mode, follow these steps:
1. Install the FME FR Flash programmer.
2. Connect the Starterkit (UART A) to the PC using a 1:1 cable.
3. Start the Flash programmer by double-clicking on the flashprg.exe icon
4. Select appropriate MCU type, COM-Port, baudrate, and the path to your HEX-File
(.mhx)
5. Power-off the board or assert and hold RESET
