Fujitsu Server PRIMERGY TX1330 M1, Operating Manual

Page: 81 / 86

TX1330 M1
Operating Manual 81
8 Troubleshooting and tips
V
CAUTION!
Follow the safety instructions in the "Safety notes and regulations"
manual or "
安全上のご注意
" and in chapter "Important information" on
page 33 .
If a fault occurs, attempt to resolve it using the measures described:
– in this chapter,
– in the documentation for the connected devices,
– in the help systems of the software used.
If you fail to correct the problem, proceed as follows:
Ê
Make a list of the steps performed and the circumstances that led to the fault.
Also make a list of any error messages that were displayed.
Ê
Switch off the server.
Ê
Contact our customer service team.
8.1 Power-on indicator remains unlit
The power-on indicator remains dark after you switch on your device.
Power cable incorrectly connected
Ê
Make sure that the power cable(s) is/are correctly connected to the server
and the grounded power outlet(s).
Power supply overloaded
Ê
Disconnect the server power plug(s) from the grounded power outlet(s).
Ê
Wait a few minutes before you plug it/them into the grounded power outlet(s)
again.
Ê
Switch on your server.