Downloaded from Projector.com
SCENICVIEW
XP70
A26361-K954-Z100-1-5E19, edition 5
English - 7
Should you discover that the delivery does not correspond to the delivery note, notify your local sales
outlet immediately.
i
It is recommended not to throw away the original packaging material. Keep it for future
transportation.
Preparing remove control
Inserting batteries
►
Open the back cover of the remote control by sliding it in the direction of the arrow.
►
Place the batteries supplied in the battery compartment. Ensure correct polarity.
►
Close the battery compartment by sliding the cover back on until you hear and feel it click into
place.
Replacing batteries
►
When the batteries are used up (indicator no longer lights up), replace them with two batteries
of the same type (LR03-AAA, 1.5 V).
Do not throw batteries or accumulators into the household waste.
Setting up the projector
We recommend that you place your projector on a surface with good anti-slip qualities. In view of the
multitude of different finishes and varnishes used on furniture, it is possible that the rubber feet of the
projector as well as the high temperatures at the bottom of the projector will mark the surface the
projector stands on.
Connecting the projector to a computer
Information on the computer connections and interfaces is contained in the operating manual for your
computer.
!
Observe the safety precautions in the "Important notes" chapter in this operating manual.