background image

36

Operating Manual

 TX1320 M1

Important information

V

CAUTION!

Proper operation of the system (in accordance with 
IEC 60950-1/EN 60950-1) is only ensured if the casing is completely 
assembled and the rear covers for the installation slots have been 
fitted (electric shock, cooling, fire protection, interference 
suppression).

Only install system expansions that satisfy the requirements and 
rules governing safety and electromagnetic compatibility and those 
relating to telecommunication terminals. If you install other 
expansions, they may damage the system or violate the safety 
regulations. Information on which system expansions are approved 
for installation can be obtained from our customer service center or 
your sales outlet.

The components marked with a warning notice (e.g. lightning symbol) 
may only be opened, removed or exchanged by authorized, qualified 
personnel. Exception: hot-pluggable power supply units can be 
replaced.

The warranty is void if the server is damaged during installation or 
replacement of system expansions.

Only set screen resolutions and refresh rates that are specified in the 
operating manual for the monitor. Otherwise, you may damage your 
monitor. If you are in any doubt, contact your sales outlet or customer 
service center.

Summary of Contents for PRIMERGY TX1320 M1























































































Reviews: