Fujitsu PRIMERGY TX1310 M3, Operating Manual

Page: 64 / 68

64 Operating Manual
TX1310 M3
Troubleshooting and tips
8.2 Server switches itself off
Server Management has detected an error
Ê
Check the error list of System Event Log in ServerView Operations
Manager, and attempt to eliminate the error.
8.3 Screen remains blank
Monitor is switched off
Ê
Switch on your monitor.
Screen has gone blank
Ê
Press any key on the keyboard.
or
Ê
Deactivate screen saver. Enter the appropriate password.
Brightness control is set to dark
Ê
Set the brightness control on the monitor to light. For detailed information,
refer to the operating manual supplied with your monitor.
Power cable or monitor cable not connected
Ê
Switch off the monitor and the server.
Ê
Check whether the power cable is properly connected to the monitor and to
the grounded power outlet.
Ê
Check whether the monitor cable is properly connected to the server and
monitor (if it is plugged in with a connector). If a separate graphics card is
installed in the server, then the monitor cable must be connected to the
graphics card.
Ê
Switch on the monitor and the server.