Fujitsu PRIMERGY TX100 S1, Service Supplement Manual

Page: 34 / 46

34 Service Supplement
TX100 S1
Replacing the power supply unit Replacement routines
– on the side
Figure 19: Chassis - hooks on the side
Ê
Insert the pre-mounted power supply unit in the chassis.
I
Make sure that the power supply unit engages.
Ê Secure the power supply unit at the rear of the server with the four screws
(see also
figure 15 on page 31 ).
Ê Connect all power supply cables to the system board and to the drives (see
the cabling in the Options Guide).
Ê Close the server and reconnect the power plug.