Fujitsu Primergy RX600 S2, User Manual

Page: 243 / 299

243
PRIMERGY RX600 S2 User’s Guide
8
Con
figurin
g Hardwa
re
a
nd utili
ties
8.3.5 Configure System RAS and Performance Submenu
Settings for memory configuration are configured on the [Configure System RAS and Performance]
submenu.
■ View Configuration Details Screen
View and Configure Memory
Board A Configure the settings for memory boards. Press the [Enter] key to display "8.3.6
View and Configure Memory Board Submenu" (
pg.244).
View and Configure Memory
Board B
View and Configure Memory
Board C
View and Configure Memory
Board D
table: Items on the Configure System RAS and Performance Submenu
Item Settings Description
Hardware Memory Test
• Enabled
（
initial value
）
• Disabled
Set whether or not to enable the POST memory
test.
Patrol Scrub
Enabled
（
unchangeable
）
Set to enable the memory scrubbing function.
Retest All System Memory • Enabled
• Disabled
（
initial value
）
Set whether or not to retest all system memory
after the event such as replacing the memory.
”Enabled” returns to “Disabled“ automatically
after testing.
Sparing Threshold
15
（
unchangeable
）
This value cannot be changed.
RAID Upgrade Gap
Disabled
（
unchangeable
）
Set the size of memory which can be added
when hot-replacing the memory boards in the
memory RAID configuration.
Desired Memory
Configuration
• Max Performance
（
initial
value
）
• Max Compatibility
• Mirror
• RAID
Set the memory configuration.
"Max Compatibility" is not supported.
View Configuration Details The detailed information on memory configuration is displayed. Press the
[Enter] key to display "
■
View Configuration Details Screen" ( pg.243).
Set Memory Hotplug in SRAT
table
Yes
（
unchangeable
）
Set to enable the control area for the memory
Hot Add. “Hot Add” is not supported.
table: Items on the View Configuration Details
Item Description
Configuration The current memory configuration is displayed.
Max Effective Size The maximum effective size of memory is displayed in MB.
Min Effective Size The size in case of that the maximum size of memory is set to the spare is displayed
in MB.
Capabilities
table: Items on the Memory Menu
Item Settings Description