Fujitsu Primergy RX600 S2, User Manual

Page: 244 / 299

244
Chapter 8 Configuring Hardware and Utilities
8.3.6 View and Configure Memory Board Submenu
Settings for memory boards are configured on the [View and Configure Memory Board] submenu.
Configuration Possible Availability of selected memory configuration is displayed.
Sparing Availability of spare memory with the current memory configuration is displayed.
Hot Replace Availability of Hot Replace with the current memory configuration is displayed.
Hot Add Availability of Hot Add with the current memory configuration is displayed. “Hot
Add” is not supported.
Board Interleave The information on memory board interleave is displayed.
table: Items on the View and Configure Memory Board Submenu
Item Settings Description
Board Status • Not Installed
• Healthy
• Using Spare
• Disabled The memory board status is displayed.
Retest Board Memory • Enabled
• Disabled
（
initial
value
）
Set whether or not to retest memory of selected
memory board. ”Enabled” returns to “Disabled“
automatically after testing.
Reserve Rank for Spare • Enabled
• Disabled
（
initial
value
）
Set whether or not to enable the spare memory. When
“Enabled” is set, the bank which has the largest mem-
ory is set as the spare memory.
LABEL DIMM_<1A/1B/2A/2B> The number of DIMM is displayed.
RANK <0-2> The RANK number of DIMM is displayed. When
DIMM is not installed, “0” is displayed.
SIZE The size of DIMM is displayed in MB or GB.
STATUS • Installed
• Not-Installed
• Partial
• Failed
• Unsupported The status of DIMM is displayed.
table: Items on the View Configuration Details
Item Description