manualshive.com logo in svg

Fujitsu Primergy RX200 S4, Operating Manual, Page: 88 / 127

Share
Download
Fujitsu Primergy RX200 S4 Operating Manual Download Page 88

86

Operating manual

 RX200 

S4

Hot-plug components

CSS components

8.1.2

Hot-plug hard disk drives

In the PRIMERGY RX200 S4 Server server you can use up to two 3.5-inch SAS 
hard disk drives, up to two 3.5-inch SATA hard disk drives or up to four 2.5-inch 
SAS hard disk drives.

The hard disk drives which can be ordered for the PRIMERGY RX200 S4 are 
supplied already mounted in an installation frame so that defective hard disk 
drives can be replaced and new drives can be added during operation. The hard 
disk drive and installation frame together make up the HDD module.

V

CAUTION!

●

The hard disk drive may not be removed from the installation frame 
by anyone except a service technician.

●

The HDD modules (drives) must all be marked clearly so that they 
can be put back in their original places after an upgrade. If this is not 
done, existing data can be lost.

●

The hot-plug function is only possible in conjunction with a corre-
sponding RAID configuration.

Further information about the RAID configuration or RAID level can 
be found in the RAID controller documentation.

V

CAUTION!

Hybrid operation using both SAS and SATA hard disk drives is not 
supported.

Summary of Contents for Primergy RX200 S4
































































































































Reviews:

No comments