RX200 S3
Options Guide
23
Main Memory
Upgrading / replacing main memory
5.2
Upgrading / replacing main memory
Ê
Open the server as described in the
chapter “Preparation” on page 17
Ê
In order to make the slots’ lateral ejector tabs more readily accessible, lift the
air duct above the processors up and off.
Figure 6: Removing a memory module
Ê
Flip the ejector tabs on each side of the slot outward (1). This levers an
installed memory module out of its slot.
Ê
If the slot was already occupied: Remove the memory module from the
slot (2).
1
1
2
