Fujitsu PRIMERGY RX200 S3 Operating Manual Download Page 56

Page: 56 / 100

Operating Manual

RX200

Configuring the Server

Startup and Operation

5.3.2

Configuration without ServerStart

Configuring IME (RAID Levels 0, 1)

The server has an onboard SAS controller with "Integrated Mirroring Enhanced"
functionality.

To configure "Integrated Mirroring Enhanced", the controller has its own
RAIDSelect Utility. For further information, refer to the “Integrated
Mirroring User’s Guide” on the

ServerBooks

CD (select “Controllers” from

the menu).

Configuring the Onboard SAS Controller with RAID functionality

You will find a description of the onboard SAS controller configuration in the
Technical Manual for the system board (see

“Literature” on page 89

The RAID functionality is configured using the

GAM

(Global Array Manager)

(see

“Literature” on page 89

Configuring the PCI RAID Controller

If your server is fitted with a PCI RAID controller, you must configure it as
described in the related documentation.

Operating system installation

Insert the installation floppy disk and the CD for the operating system you
want to install in the corresponding drive.

Reboot the server.

Follow the instructions on screen and in the manual for the operating
system.

If your server is equipped with a RAID controller, please read how to install the
desired operating system in the related manual.

Summary of Contents for PRIMERGY RX200 S3





































































































Search results

Summary of Contents for PRIMERGY RX200 S3

Reviews:

Related manuals for PRIMERGY RX200 S3

Brands by name

Popular brands

Fujitsu PRIMERGY RX200 S3, Operating Manual

Search results

Summary of Contents for PRIMERGY RX200 S3

Reviews:

Related manuals for PRIMERGY RX200 S3

Brands by name

Popular brands