Fujitsu PRIMERGY RX100 S7, Upgrade And Maintenance Manual

Page: 100 / 490

100 Upgrade and Maintenance Manual
RX100 S7
Basic software procedures
I
For detailed information on iRMC settings, refer to the "iRMC S2/S3 -
integrated Remote Management Controller" user guide.
Executing the fan test via ServerView Operations Manager
Ê
Open the ServerView Operations Manager and log in.
Ê
Under Administration select Server Configuration .
Ê
In the hierarchy tree of the Server list tab, select the server to be configured.
Ê
In the right-hand side of the window, specify the details on the selected
server and confirm your entries by clicking
GO... .
In the left-hand section of the window, the Configuration tab is being
activated.
Ê
In the navigation area of the
Configuration
tab, select
Other Settings
.
Ê
Under
Daily Fan Test
, set the daily fan test time to a few minutes from the
current time. (Ensure to note down your previous setting.)
Ê
Click Save Page .
The fan test will be started at the specified time.
Ê
After the fan test is complete, restore the time setting to its initial value and
click
Save Page .
I
For more detailed information, refer to the "ServerView Operations
Manager" user guide.
For the Japanese market: Executing the fan test via Chassis ID Prom Tool
Ê
Prepare a boot medium (CD) containing the Chassis ID Prom Tool .
Ê
Insert the CD into the DVD drive and close the drive tray.
Ê
Shut down and restart the server.
The server will boot from the Chassis ID Prom Tool medium.
Ê
After the boot process is complete, press
[ESC]
to enter the command
prompt screen.
Ê
Enter
IPMIVIEW.EXE
and press
[Enter]
to start the IPMI Tool .
Ê
Under System Specific Functions select Fan Test and press the
[F9]
function
key to start the fan test.