26
Tape Stuck
E
Flashing
The cartridge is stuck in the drive.
Action: Try forcing ejection. If this fails, call for ser-
vice.
Unloading
S
—
Either the drive is unloading a cartridge, or a car-
tridge is being ejected from the drive and replaced in
the magazine.
UpgradeErr
E
Flashing
An error occurred while upgrading the firmware.
Worm Media
E
Flashing
A high error rate has been detected while writing,
suggesting that the tape is nearing the end of its
useful life.
Action: Copy any data you wish to keep from the
cartridge onto a new cartridge and discard the old
cartridge.
Write x.y
S
—
The drive is writing data to tape. “x.y:1” is the cumu-
lative compression ratio since power-on, or since
the compression ratio was last cleared. For exam-
ple, “Write 2.1” means a compression ratio of 2.1:1.
The compression ratio will only be displayed if 1 MB
or more data has been written since power-on.
Write Fail
E
Flashing
A WRITE, WRITE FILEMARK or ERASE command
has failed.
Action: Use a new cartridge.
Write Fail:
Clean or Use New
Tape
E
Flashing
The drive could not write to the tape, which may be
worn or damaged.
Action: Insert a cleaning cartridge to clean the tape
heads, ensuring that the tape in the cleaning car-
tridge has not been used up, or use a new cartridge.
Write Protected
Tape
E
Flashing
A WRITE, WRITE FILEMARK or ERASE command
has been attempted on a write-protected cartridge.
Action: Remove the cartridge and change it to write-
enabled.
Wrong FW
E
Flashing
The upgrade firmware is not compatible. The origi-
nal firmware is not changed or modified.
