Econel 50
Service Supplement
19
Replacement Routines
Replacing the Floppy Disk Drive
4.3
Replacing the Floppy Disk Drive
Ê
Remove the left side cover and the front panel as described in section
“General Purposes” on page 13.
Ê
Disconnect the power supply cable (connector P4) from the floppy disk drive.
Ê
Disconnect the data cable T26139-Y1248-V8 from the floppy disk drive.
Ê
Detach the USB connector cable T26139-Y3894-V2 from the connector
USB1/2 on the system board (see D1859 sticker).
Figure 6: Removing the slide-in unit with floppy disk drive
Ê
Press together the two springs of the EasyClick rails until they are
unlocked (1).
Ê
Remove the slide-in unit with the floppy disk drive from the location (2).
1
1
2
Summary of Contents for PRIMERGY Econel 50
