Fujitsu PRIMERGY BX922 S2, Options Manual, Page: 45 / 70

BX922 S2
Options Guide 45
Mezzanine cards
Population rules for mezzanine cards in the BX400 S1 system unit
The connection blade slots of the BX400 S1 system unit are numbered as
follows.
Figure 19: Connection blade slots (BX400 S1 system unit)
The table below shows the connections of the connection blade slots to the slots
for mezzanine cards.
I
Connection blades within one fabric must have the same technology, i.e.
either Ethernet or Fibre Channel or Infiniband.
As a result, the rules for populating the mezzanine card slots are as follows:
●
If a 1 Gb Ethernet mezzanine card is installed in slot 1 of a server blade, at
least one 1 Gb Ethernet connection blade must be installed in CB slot 2 of
the system unit.
●
If a 10 Gb Ethernet mezzanine card is installed in slot 1 of a server blade, at
least one 10 Gb Ethernet connection blade must be installed in CB slot 2 of
the system unit.
●
If an FC mezzanine card is installed in slot 1, at least one FC connection
blade must be installed in CB slot 2 of the system unit.
Server blade Midplane Connection blade slots
Onboard LAN Fabric 1
CB1:
1 or 10 Gb Ethernet
Mezzanine
card slot 1
Fabric 2
CB2:
1 or 10 Gb Ethernet or Fibre Channel
Mezzanine
card slot 2
Fabric 3
CB3:
1 or 10 Gb Ethernet or Fibre Channel
or Infinband
CB4:
1 or 10 Gb Ethernet or Fibre Channel
Table 1: Fitting rules for connection blade slots (BX400 S1 system unit)
CB 1 (F ab ric 1) CB 2 (F ab ric 2)
CB 3 (F ab ric 3 ) CB 4 (F ab ric 3 )