manualshive.com logo in svg

Fujitsu PRIMERGY BX600, User Interface Description

The Fujitsu PRIMERGY BX600 is a high-performance server system that empowers businesses with its cutting-edge technologies. Unlock the full potential of this exceptional product by accessing the comprehensive User Manual, available for free download from our website. Discover the in-depth features and unleash the power of this incredible server system.

Share
Download
background image

Extended Configuration Menu                                                                   

Web-Based Management Interface 

Intelligent Blade Panel Module 

129 

perform a save.   

 

 

 

6.2.4.5.2  Viewing Authentication List Summary Page 

Non-Configurable Data 

Authentication List

 - Identifies the authentication login list summarized in this row.   

Method List

 - The ordered list of methods configured for this login list.   

Login Users

 - The users you assigned to this login list on the User Login Configuration 

screen. This list is used to authenticate the users for system login access.   

802.1x Port Security Users

 The users you assigned to this login list on the Port Access 

Control User Login Configuration screen - This list is used to authenticate the users for 
port access, using the IEEE 802.1x protocol.   

Command Buttons   

Refresh

 - Update the information on the page.   

 

 

 

 

6.2.4.5.3  Defining User Login Page 

Note: This page provides a user account (from those already created) to be added into 
the Authentication List. 

Each configured user is assigned to a login list that specifies how the user should be 
authenticated when attempting to access the IBP or a port on the IBP. After creating a new user 
account on the User Account screen, you should assign that user to a login list for the IBP 
using this screen and, if necessary, to a login list for the ports using the Port Access Control 

Summary of Contents for PRIMERGY BX600


































































































































































































































































































Reviews:

No comments

Related manuals for PRIMERGY BX600

National Instruments NI 9871 Operating Instructions Manual preview
NI 9871
Brand: National Instruments Pages: 24
National Instruments NI 9478 Operating Instructions Manual preview
NI 9478
Brand: National Instruments Pages: 32
National Instruments FIELDPOINT FP-1600 Operating Instructions Manual preview
FIELDPOINT FP-1600
Brand: National Instruments Pages: 8
Watchguard Firebox T15 Quick Start Manual preview
Firebox T15
Brand: Watchguard Pages: 39
Draytek Vigor 2710e Quick Start Manual preview
Vigor 2710e
Brand: Draytek Pages: 8
bintec elmeg RM7000 Installation Manual preview
RM7000
Brand: bintec elmeg Pages: 33
Server Technology Sentry Global Security Modem Installation And Operation Manual preview
Sentry Global Security Modem
Brand: Server Technology Pages: 22
Patton electronics 3087 Quick Start Manual preview
3087
Brand: Patton electronics Pages: 12
National Instruments SCXI-1120 User Manual preview
SCXI-1120
Brand: National Instruments Pages: 130
C-Com IPAM-1600s Series User Manual preview
IPAM-1600s Series
Brand: C-Com Pages: 148
Paradyne Fan Tray 8820-S2-900 Installation Instructions Manual preview
Fan Tray 8820-S2-900
Brand: Paradyne Pages: 6
NETGEAR GSM7224v2 - Layer 2 Managed Gigabit Switch Datasheet preview
GSM7224v2 - Layer 2 Managed Gigabit Switch
Brand: NETGEAR Pages: 3
XtendLan XL-HCW224C User Manual preview
XL-HCW224C
Brand: XtendLan Pages: 52
Compro Technology RS-2104 Quick Installation Manual preview
RS-2104
Brand: Compro Technology Pages: 2
Korenix JetNet 3705 User Manual preview
JetNet 3705
Brand: Korenix Pages: 25
MiWire SeaWire Pro User Manual preview
SeaWire Pro
Brand: MiWire Pages: 24
Variscite VAR-SOM-MX8M-PLUS Quick Start Manual preview
VAR-SOM-MX8M-PLUS
Brand: Variscite Pages: 2
netsys NV-600W User Manual preview
NV-600W
Brand: netsys Pages: 243

Brands by name

Popular brands

Load more brands