2 GbE Pass-Thru Blade Installation
21
E
GbE Pass-Thru Blade installation points
Install this product in a network blade slot of the chassis.
2.2
Installation and Removal
This section explains how to install and remove the GbE Pass-Thru Blade.
2.2.1 How to remove the GbE Pass-Thru Blade
1
Remove all LAN cables connected to the GbE Pass-Thru Blade.
2
Remove the GbE Pass-Thru Blade.
Grip and pull out the handle (1), pull the GbE Pass-Thru Blade towards you and remove it
(2).
3
Install a dummy switch blade/GbE Pass-Thru Blade.
"2.2.2 GbE Pass-Thru Blade Installation Procedure"(pg.22)
`
After removing the GbE Pass-Thru Blade or the dummy switch blade, do not operate
the chassis with an empty slot. Be sure to install a dummy switch blade or GbE Pass-
Thru Blade.
[Rear of chassis]
Network blade
slot2
Network blade
slot4
Network blade
slot1
Network blade
slot3
2
Handle
1
