22
2.2.2 GbE Pass-Thru Blade Installation Procedure
1
Remove the dummy switch blade/GbE Pass-Thru Blade.
Remove any existing dummy switch blade/GbE Pass-Thru Blade installed in the target slot.
"2.2.1 How to remove the GbE Pass-Thru Blade"(pg.21)
2
Install the new GbE Pass-Thru Blade.
Insert the GbE Pass-Thru Blade (1) and restore the handle (2).
`
The procedure for installing the dummy switch blade is the same as that for
installing the GbE Pass-Thru Blade.
`
Before installing the GbE Pass-Thru Blade, make sure the blade connectors are
clean.
`
After restoring the handle, secure the GbE Pass-Thru Blade in place by
pressing it firmly.
1
2
Handle