Installing the tower server
Installation
A26361-K632-Z100-1-7619
13
Connecting devices to the server
The ports for external devices are on the rear of the server. Which ports are available on your server
depend on the boards installed. The standard ports are indicated by symbols.
2
4
6
5
3
1
7
8
C A N
9
1 = Monitor port
2 = Serial port 1
3 = Keyboard port
4 = Parallel port
5 = Serial port 2
6 = PS/2 mouse port
7 = CAN-bus port
8 = Slots for additional ports
9 = Slots for additional ports
Ê
Connect the data cables at the server and peripherals.
i
Some of the devices that you connect require special drivers (see the documentation for
the connected device).
If a separate graphics card is used in a slot, then the graphics controller on the system board is
automatically deactivated. The related monitor port (1) cannot be used. Instead, connect the data
cable of the monitor to the monitor port of the graphics card.
