U41644-J-Z816-5-76
A-1
Appendix A Racks
The PRIMEQUEST 520/420 rack-mount type (12U) and PCI_Box rack-mount type
(4U) supplied by Fujitsu Technology Solutions are mounted or are to be mounted on a
PRIMECENTER rack, which is the standard rack series used by Fujitsu Technology
Solutions.
The system unit and the PCI_Box can also be mounted on a 19-inch rack that
conforms to the Electronic Industries Association (EIA) standards. These racks must
satisfy the structural conditions described in
assumes that the PRIMEQUEST 520/420 is normally installed in a rack manufactured
by Fujitsu Ltd., but it can be read as conceptual information for using any other rack.
A detailed description for installing a PRIMEQUEST 520/420 in a PRIMECENTER
rack is part of the maual
PRIMEQUEST 520/420 Installation Instructions
(U41658-J-
Z816-x-76) edited by Fujitsu Technology Solutions.
A.1
Where you can find information on
PRIMECENTER racks
The PRIMECENTER racks are supplied with a Technical Manual: "PRIMECENTER
Rack System for PRIMERGY, PRIMEPOWER, BS2000, STORAGE"
(
U41282-J-Z156-x-74
). Here you can find the technical specifications of the
PRIMECENTER rack models and their expansion.
A.2
Rack Mounting
The PRIMEQUEST 520A*/520/420 (including peripherals) has been developed, and
its operation guaranteed based on an assumption that it is mounted in the 19-inch
global rack manufactured by Fujitsu. For safe operation of this equipment mounted in
a Fujitsu 19-inch global rack, the conditions specified in Appendix
for mounting in Fujitsu 19-inch global racks,"
must be satisfied.
*: not supported by Fujitsu Technology Solutions