U41644-J-Z816-5-76
2-19
Laufende K/F 1
(3)
Standard configuration for outside Japan (general) (including single
power feed system and redundant power supply unit)
This section shows the input power system in the standard PRIMEQUEST 520A*/
520/420 configuration for outside Japan (general) (including a single power feed
option and redundant power supply unit).
CB:
Circuit breaker (overcurrent protector)
*1:
Power cables (Input#0 to Input#2) are connected to PSUs (PSU#0 to PSU#2)
as shown below, on a one-to-one basis.
*2:
For information about the circuit breakers on the customer's distribution
panel, see
Section 2.6, "Circuit Breaker Characteristics."
Figure 2.9 Input power system diagram for the PRIMEQUEST 520A*/520/420
for outside Japan (general) (standard configuration)
*: not supported by Fujitsu Technology Solutions
