CHAPTER 3 Work before Operating System Installation
3.3 Connection and Setting of MMB
21
CA92344-0536-04
3.3.7 Set up of telnet
MMB telnet is set up.
See “
Storage of the configuration information
” for the backup of set up information.
The following condition must be satisfied in advance when field engineers perform the Maintenance tasks on this product.
-
Video Redirection and Virtual Media are available.
For details on how to setup the procedure, see Chapter 1.3.3 [Console Redirection Setup] window in the
PRIMEQUEST 2000 Series Tool Reference (CA92344-0539).
-
SSH or Telnet is available.
For details on how to setup the procedure, see Chapter 1.5.4 [Network Protocols] window in the PRIMEQUEST 2000
Series Tool Reference (CA92344-0539).
Note
To set up telnet, log in to Administrator privileges.
Operations
1.
Click [Network Configuration]-[Network Protocols].
→ [Network Protocols] window is displayed. For details on [Network Protocols] window, see “1.5.4[Network
Protocols] Window” of PRIMEQUEST 2000 series Tool Reference (CA92344-0539).
FIGURE 3.7
Example of [Network Protocols] Window
2.
Items of [Telnet] are set.
Note
MMB uses the following fixed port number of TCP/IP. Do not change the following port numbers.
-
623/udp: For RMCP communication
-
664/udp: For RMCP communication
3.
Click [Apply] button.