Fujitsu Power Select D2703-S, Short Description

Page: 23 / 25

Installing/removing or replacing processor (with heat sink)
English - 5
Installing/removing or replacing
processor (with heat sink)
Disconnect the system from the mains voltage before performing any of the tasks
described below. Details are contained in the operating manual of your system.
Technical data
•
D2703-S:
AMD Mobile Turion, AMD Mobile Sempron, max. 35 W in der Bauform S1
•
D2703-A:
AMD Mobile Sempron, max. 9 W in S1 design
Procedure
1
2
1
1
2
► Remove any fan and the heat sink.
► Use a fl athead screwdriver. Turn the screw (1) 180° anti-clockwise.
► Remove the processor from the slot (2).
► Insert the new processor in the slot.
► Turn the screw (1) 180° clockwise.
The socket with the processor clicks into place.
Please note that, depending on the heat sink used, different heat sink
mounts are required on the mainboard.
► Depending on the con fi guration variant, you must pull a protective foil off the heat sink
or coat the heat sink with heat conducting paste before fi tting it.
Fujitsu Technology Solutions 19