background image

Calibrating the Point 510 Display Screen

3-3

Calibrating the Point 510 Display Screen

3

Each time you tap the Point 510 screen, the Point 510 pen tablet determines where you 
tapped it in order to perform the function you requested. Calibration helps the Point 
510 pen tablet accurately determine what you are tapping. 

Determining When to Perform Pen Calibration

3

The Point 510 pen tablet comes from the factory already calibrated so that it interprets 
the pen location correctly. If the cursor is not displayed under the pen tip when you 
touch the screen, you should re-calibrate the Point 510 pen tablet. 

Pen calibration may be required in the following situations: 

• The previous user of the Point 510 pen tablet writes with the opposite hand and 

has calibrated the pen tablet.

• The Point 510 pen tablet has been in use for some time without being re-calibrated. 

• You have rotated the screen from landscape (wide) to portrait (tall) orientation, or 

from portrait to landscape orientation. (Note that rotating the screen does not 
affect pen calibration, however, changing the screen orientation may cause you to 
hold the pen tablet and pen in a slightly different position.) 

Performing Pen Calibration

3

Calibrating the pen tablet display screen is simple, although you should try to keep 
your hand steady to get the best calibration reading. To calibrate the pen, do the 
following:

1. If you are using Windows 95: From the Start menu, select Settings, then select 

Control Panel, then double-tap Handwriter icon. Tap the General property sheet. 
On the General property sheet, tap the Pen Calibration button.

If you are using Windows for Workgroups: From the Start menu, select Settings, then 
select Control Panel, then double-tap the Calibrate icon.

The screen shows the instructions for Pen Calibration. 

2. Position the Point 510 pen tablet as you normally do during use. Be sure to hold 

the pen at the angle that you regularly use. 

Summary of Contents for Point 510









































Reviews: