Fujitsu Point 510, User Manual

Page: 22 / 40

2-6 Using the Point 510 Pen Tablet
Suspending and Resuming Operation 2
The Point 510 pen tablet allows you to suspend and resume system operation without
exiting the programs you are using. Suspend mode conserves battery power while
saving your recent work. A fully charged battery pack will maintain the pen tablet in
suspend mode for approximately ten (10) days.
The Power button on the Point 510 pen tablet can be set up as a Suspend/Resume
Power button or as an On/Off Power button.
How you use the Suspend/Resume function depends on how your pen tablet is set up.
If you are not sure, refer to “Power” on page 2-1, and see the computer professional at
your site who maintains the Point 510 pen tablets. The procedures are outlined briefly
in the following table:
Entering Suspend Mode – Suspend/Resume Power Button 2
If your Point 510 pen tablet is set up so that the Power button suspends and resumes
operation you can take the following steps to put the pen tablet in Suspend mode:
1. Press the Power button once. The Point 510 pen tablet emits a double beep (if the
speaker is on). Note that your system may take a few seconds to suspend
operation depending on how it is configured. If the pen tablet does not appear to
be responding, do not press the button repeatedly or more firmly.
Caution
• Do not press the Power button more than
once to resume
operation. The Point 510 pen tablet will take several
seconds to reload information before it resumes operation,
and pressing the button again during the resuming process
could produce unpredictable results.
Point 510 Pen Tablet Setup Suspend and Resume Procedure
Suspend/Resume To suspend, press the Power button once.
To resume, press the Power button once.
On/Off To suspend, use power management software to select Suspend
mode (do not press the Power button).
To resume, press the Power button once.