Fujitsu Plasmavision W P42HHS30E User Manual Download Page 7 | Manualshive

Page: 7 / 11

Fujitsu Plasmavision W P42HHS30E User Manual Download Page 7

E-7

English

1

power switch

When pressed while in the “OFF” state, the power indicator lamp lights and the display is placed in the “ON

” state, and the power

can be turned “ON” or “OFF” by the remote control or on the control panel of the display. When pressed while in the “ON

” state,

the power indicator lamp goes out and the display is placed in the “OFF” state.

2

Display input (picture) terminal

Connect this terminal to the display output terminal on the tuner using the special cable provided.

3

Display input (audio) terminal

Connect this terminal to the display output terminal on the tuner using the special cable provided.

4

External speaker output terminal (EXT SP)

Connect this terminal to the optionally available speaker.

When connecting a cable, attach a ferrite core to the cable. (See P. E-8.)

*See the speaker instruction manual for more information.

5

Power input terminal

Connect this terminal to the power cable supplied with the display.

LOWER PART

⑤

④

③

②

①

E-MHD00833(06̲08).p65

03.10.17, 11:42 AM

Page 7

Adobe PageMaker 6.5J/PPC

«
...
5
6
7
8
9
...
»

Summary of Contents for Plasmavision W P42HHS30E












Reviews:

No comments