E-40
OTHER ADJUSTMENTS (Continued)
• Selecting the settings of Video Input terminal (VIDEO1-4)
Select the video input format.
Each time
is pressed, the setting is switched.
Press
to store.
* RGB input is not made to Video 3.
Video Format
You can use this option to select the video format appropriate for the input signal.
Each time you press
or
, one of the available modes appears in the following sequence:
[Auto1]
: Automatically selects NTSC, PAL and SECAM.
[Auto2]
: Automatically selects NTSC and M-PAL.
[Other than Auto]
: You need to select a system appropriate to the input signal.
Press
to store.
Press
or
to select the items for setting. It is switched as shown as below.
Press
to proceed to the next step.
Auto Store
Press
or
to select the country or region, and then press
.
All the channels are scanned, and only the channels that can be received are assigned to the Program Nos.
* Several minutes are required to scan all the channels. To cancel the operation in progress, press
.
* See page E-47 for the selectable TV frequencies.
Manual Store
Press
or
to select the Program No. to be stored.
Press
or
to select the Manual Store items to be set (Setting or Name). Press
to proceed.
Setting
Press
or
to select the setting item.
• Freq.
Each time
or
is pressed, the TV frequency is switched.
• System
Each time
or
is pressed, the TV SYSTEM is switched.
SETTING THE INPUT TERMINALS
CHANNEL SETTING
Input Terminal Settings Screen
Channel Settings Screen
MHD01862_E.book 40 ページ ２００５年６月１４日 火曜日 午前１１時５０分
