Loading Documents
29
Loading Documents
Load documents onto the ScanSnap as follows:
1.
Check the number of sheets in the document stack.
The maximum number of sheets that can be loaded on the ScanSnap is as follows:
For A4-size paper or smaller: A document stack of 5 mm or less
(50 sheets at 80 g/m
2
or at 20 lb)
2.
To prevent paper jams, fan the document.
1. Hold the document with both hands and fan it out as shown in the figure below.
2. Turn the document by 90 degrees, and then fan it in the different orientation again.
3.
Straighten the edges of the document, and load it onto the ScanSnap so
that the top edges of the paper form a step-like pattern.
If you try to scan more sheets that can be loaded, the following problems may occur.
•
A file may be improperly created due to an excessive file size.
•
A paper jam or other irregular feeding may occur.
If the document is scanned with its both edges not straightened, the document might be
jammed or be damaged.
Back
Bac
k
Step-like
Scanning direction
Summary of Contents for PA03586-B205
Page 1: ...Operator s Guide P3PC 2432 02ENZ0 ...
Page 14: ...Contents 14 Installation Specifications 368 About Maintenance 369 Index 370 ...
Page 44: ...For S1500 44 12 Click the Close button 13 Remove the Setup DVD ROM from the DVD ROM drive ...
Page 264: ...About Actions for Mac OS Users 264 4 Check the scanned image data ...