Page 1
SeeLeveL Sender Installation Manual 710-JS / 710-ES / 710-SS
HOLDING TANK MONITOR
710-JS-ES-SS Manual_v1.0 - 05-Jul-2022
W
CAUTION:
explains safety information that could cause
damage to the product, including data loss.
W
WARNING:
explains dangers that might result in
personal injury or death.
W
NOTE:
expands on information for any procedures.
SAFETY SYMBOLS INFORMATION
CANADA
Garnet Instruments
286 Kaska Road
Sherwood Park, AB T8A 4G7
USA
Garnet US Inc.
5360 Old Granbury Road
Granbury, TX 76049
SENDER MANUAL
710-JS | 710-ES | 710-SS
The SeeLeveL Senders 710-JS, 710-ES, 710-SS are used with SeeLeveL II
Tank Monitoring systems that can monitor either two, three or four tanks.
The 710-JS sender is 6" high (not including tabs) and has a resolution of
1/4". This model can measure tanks from 5" to 7.5" high tanks and cannot
be stacked. The higher resolution is optimal for low-profile tanks.
The 710-ES sender is 12" high (not including tabs) with a resolution of 3/8"
and can measure tanks from 5.5" to 14" high with a single sender, and up
to 26" with double-stacked senders.
The 710-SS sender is 16" high (not including tabs) and has a resolution
of 1/2". This model can measure tanks from 7" to 18" high with a single
sender, and up to 34.5" with double-stacked senders.
The senders are mounted on the outside of the holding tanks and can
be stacked to fit taller tanks. They work on most plastic or polyethylene
holding tanks that contain water-soluble fluids. They are not compatible
with metal holding tanks.
See more information about sender lengths on page 3.
The communication protocol used between our senders and displays is
proprietary allowing us to control the accuracy and functionality of our
systems ensuring our customers experience reliable operation.
INTRODUCTION
