Fujitsu P42VHA30W, P42HHA30W User Manual Download

Page: 41 / 46

English

E-29

* On-screen information disappears if you do not take any action for about 60 seconds.

* Functions may not be available with some models and some device options.

* The adjustment range varies with the display signal. You can adjust the display quality to the value you want within the adjustable range.

SETTING THE INPUT TERMINALS

• Selecting the settings of Video/S-video Input terminal

You can use this option to select the color format appropriate for the input signal.

Each time you press or , one of the available modes appears in the following sequence:

Auto1:

Automatically selects NTSC, PAL and SECAM.

Auto2:

Automatically selects NTSC and M-PAL.

Other than Auto: You need to select a system appropriate to the input signal.

Press

to store.

• Selecting the settings of D-SUB Input terminal

You can use this option to select the signal system it will receive to D-SUB Input terminal.

(1) Select D-SUB Input and press

D-SUB Input screen appears.

(2) Select the signal system to receive.

Each time you press or , one of the available choices appears in the following sequence:

RGB-PC

Decoder

RGB-PC: For using RGB for PC

Decoder: For using digital broadcast tuner

(3) Press

to select Mask.

(4) Select Decoder by FUNCTION to set up Mask.

Each time you press or , one of the available choices appears in the following sequence:

Off:

Does not mask.

Number: Masks the fringe (top, bottom, right and left) of the screen by the number of pixels

specified.

(5) Press

to store.

• Selecting the settings of DVI-D Input terminal

You can select the signal method input to the DVI input terminal.

Each time or is pressed, the setting is changed.

DVI1

DVI2

DVI1:

Used when connecting to a PC.

DVI2:

Used when connecting to a DVD player or digital tuner.

Press

to store.

* Set according to the signal method before connecting peripheral device.

“D-SUB Input” selection screen

1234567890123456789012345678901

This fringe part is masked.

E-Plasma-wide2 (28-29)

03.10.3, 0:19 PM

Page 29

Adobe PageMaker 6.5J/PPC

Summary of Contents for P42VHA30W, P42HHA30W















































Search results

Summary of Contents for P42VHA30W, P42HHA30W

Reviews:

Related manuals for P42VHA30W, P42HHA30W

Brands by name

Popular brands

Fujitsu P42VHA30W, P42HHA30W, User Manual

Search results

Summary of Contents for P42VHA30W, P42HHA30W

Reviews:

Related manuals for P42VHA30W, P42HHA30W

Brands by name

Popular brands