manualshive.com logo in svg

Fujitsu MHX2250BT, Product Manual, Page: 199 / 296

Share
Download
Fujitsu MHX2250BT Product Manual Download Page 199

 

5.3   Host Commands 

*4) 

Automatic Acoustic Management (AAM)  

The host writes to the Sector Count filed with the requested acoustic management 
level and executes this command with subcommand code 42h, and then Automatic 
Acoustic Management is enabled.  The AAM level setting is preserved by the 
drive across power on and COMRESET. 

AAM Level 

Sector Count Filed 

Performance mode (Fast Seek) 
Acoustic mode (Slow Seek) 
Abort 
Non Operate 

C0h-FEh 

80h-BFh 

01h-7Fh 

00h, FFh 

High-speed seek to which gives priority to the performance operates as for 
"Performance mode", and low-speed seek by which the seek sound is suppressed 
operates as for "Acoustic mode". 

Setting the seek mode by this command is applied to the seek operation in all 
command processing. 

*5) 

Write-Read-Verify feature (optional)  

Table 5.36  Write-Read-Verify feature sector counts 

SC SN 

Description 

00h (Mode 0) 

- 

Enabled Always 

01h (Mode 1) 

- 

The first 65,536 logical sectors written by the host 
after every spin-up (or reset) or after issuing this 
set features shall be verified. 

02h (Mode 2) 

- 

Device may determine, for itself, how many logical 
sectors to do. 

03h (Mode 3) 

Verify count 

The first (Verify Sector Count x 1024) logical 
sectors written by the host after every spin-up or 
after issuing this set features shall be verified. 

04h-FFh - 

Reserved 

(Abort) 

 

 

 

 

C141-E254 

5-125 

Summary of Contents for MHX2250BT









































































































































































































































































































Reviews:

No comments