Fujitsu MB2198-130, Operation Manual

Page: 27 / 49

20
4.3 Installing the Evaluation MCU
■
Installing the Evaluation MCU
Open the lever of the evaluation MCU mounting IC socket (SC1) to from the solid-line position to
the dotted-line position.
Figure 4.3-1 Installing the Evaluation MCU
■
Mounting Position
Align pin No. 1 of the evaluation MCU with its pin hole in the evaluation MCU mounting IC socket
(SC1) and insert the evaluation MCU horizontally. (Check this from above.)
Figure 4.3-2 Mounting Position
Install the evaluation MCU on the evaluation MCU mounting IC socket on the adapter board as illustrated in
Figure 4.3-1 to Figure 4.3-3. To uninstall the evaluation MCU, follow the instruction illustrated in Figure 4.3-4.
Evaluation MCU
Evaluation MCU mounting IC socket
M2(SC1)
Evaluation MCU
Evaluation MCU mounting IC socket
pin No. 1
Chapter 4 Connections