manualshive.com logo in svg

Fujitsu M3096NT, Operator'S Manual, Page: 94 / 147

Share
Download
Fujitsu M3096NT Operator'S Manual Download Page 94

4 – 6

4.3.1.1

Remote Scanner Mode

Remote Scanner Mode is supported to permit temporary login to
another File Server. The File Server has to be configured by
Administration Software for M3096NT to Login..

At the “Enter User ID” screen, by pressing Start button before
entering User ID numbers, Remote Scanner Mode is invoked and the
message below is displayed.

A

l t e r n a t e

S e r v e r ?

C o n t = S t a r t

C a n c e l = S t o p

By pressing Start button, enter the Remote Scanner Mode.
By pressing Stop button, quit the Remote Scanner Mode and return to
User ID input screen.

Enter IP address of the Alternate File Server.

S e r v e r

I P

A d d r e s s

x x . X x x . x x x . x x x

See 4.2 Server IP Address Setting for how to input IP Address.
By pressing Stop button, quit the Remote Scanner Mode and return to
User ID input screen.

Alternate Server is correctly specified in above procedure, the network
scanner searches for the alternate File Server and try to Login.
If the Login is successful, same screen to 3.1 User ID Input is
displayed. After then procedure is same.In this time, it is still possible
to invoke Remote Server mode but it is not nested. How many times
Remote Scanner is invoked, after the scanning returned to default File
Server.
If the login is unsuccessful, error message is displayed and return to
User ID input screen.

Summary of Contents for M3096NT




















































































































































Reviews:

No comments