manualshive.com logo in svg

Fujitsu M3096NT, Operator'S Manual, Page: 133 / 147

Share
Download
Fujitsu M3096NT Operator'S Manual Download Page 133

6 – 3

6.3.2

Cleaning the ADF

Clean the automatic document feeder (ADF) once every 5,000 pages.
The cycle depends on the types of documents used (paper quality, a
level of toner fusing on paper).

1

Pull the ADF lever up to open the ADF.

2

Use the dry cloth or a cloth with ethyl alcohol to softly remove
dirt and dust as follows.

Pad:

Wipe the pad in a downward direction (indi-
cated by the arrow).  Be careful not to hook
the pick spring when wiping.

Glass:

Wipe the glass lightly.

Pick roller :

Wipe the roller softly.  Be careful not to
damage the surface of the roller.

Feed roller and coupled feed roller:

Wipe the rollers softly.  Be careful not to
damage the surface of the rollers.

Ejection roller and coupled ejection roller:

Wipe the rollers softly.  Be careful not to
damage the surface of the rollers.

Sheet guide (white part):

Wipe the sheet guide softly.

3

Close the ADF to lock the ADF lever.

Figure 6.3

 Cleaning the ADF

Pad

Automatic document feeder

Sheet guide (white part)

Glass

Coupled feed roller

Pick rollers

Ejection roller (Clean the roller
on the opposite side also.)

Feed roller

Pick spring

ADF lever

Summary of Contents for M3096NT




















































































































































Reviews:

No comments