Fujitsu LIFEBOOK U9312X Operating Manual Download Page 56

Page: 56 / 105

Working with the notebook

SIM card (con

guration dependent)

Your device supports cards in Nano-SIM format (12.3 mm × 8.8 mm).

A SIM card (Subscriber Identity Module) is a chip card which is inserted in a mobile phone or
notebook and, together with an integrated UMTS/LTE module, enables access to a mobile network.

When handling SIM cards, follow the instructions supplied by the provider.

Inserting the SIM card

►

To make the device currentless, switch off the battery (

"Switch the battery off and on", Page 47

►

Open the slot cover (1).

►

Pull the SIM card holder out of the slot (2).

►

Insert the SIM card (3) in the SIM card holder as shown.

►

Push the SIM card holder back into the slot (4).

►

Close the slot cover (5).

►

Switch the battery on again (

"Switch the battery off and on", Page 47

Fujitsu

Summary of Contents for LIFEBOOK U9312X










































































































Search results

Summary of Contents for LIFEBOOK U9312X

Reviews:

Brands by name

Popular brands

Fujitsu LIFEBOOK U9312X, Operating Manual

Search results

Summary of Contents for LIFEBOOK U9312X

Reviews:

Brands by name

Popular brands