Fujitsu LIFEBOOK U9310 Operating Manual Download Page 48

Page: 48 / 82

Working with the notebook

Switching on the notebook via the port replicator

►

Press the ON/OFF button on the port replicator to switch the notebook on.

Switching off notebook via Port Replicator

►

Close all applications and shut down your operating system (please refer
to the manual for the operating system).

►

Press the ON/OFF button on the port replicator to switch the notebook off.

If the notebook cannot be shut down properly, press the ON/OFF button
of the notebook for about four seconds. The notebook will switch itself
off. Any unsaved data may however be lost.

Disconnecting the notebook from the Port Replicator

►

Disconnect the supplied USB cable (USB Type-C) from the USB port Intel® Thunderbolt

with charging function and display port (USB Type-C) of the notebook.

Fujitsu

Summary of Contents for LIFEBOOK U9310



















































































Search results

Summary of Contents for LIFEBOOK U9310

Reviews:

Brands by name

Popular brands

Fujitsu LIFEBOOK U9310, Operating Manual

Search results

Summary of Contents for LIFEBOOK U9310

Reviews:

Brands by name

Popular brands