Fujitsu LifeBook T901 Series Operating Manual Download Page 26

Page: 26 / 140

Working with the notebook

Switching on the notebook

Notebook:switching on

Power-onindicator

Suspend/Resumebutton

►

Slide the ON/OFF switch (1) to the right to switch on the notebook.

The ON/OFF switch returns automatically to its original position.
The ON/OFF switch (1) lights up whenever the system is switched on.

Programming the ON/OFF switch

You can program the ON/OFF switch:

Operating system

Menu

Windows XP

Start - (Settings) - Control Panel - Performance and
Maintenance - Power Options - Advanced

Windows 7

Start - (Settings) - Control Panel - System and
Security - Power Options

If you have assigned a password, you must enter this when requested to
do so, in order to start the operating system. Detailed information can be
found in the chapter

"Security functions", Page 76

Fujitsu Technology Solutions

Summary of Contents for LifeBook T901 Series













































































































































Search results

Summary of Contents for LifeBook T901 Series

Reviews:

Brands by name

Popular brands

Fujitsu LifeBook T901 Series, Operating Manual

Search results

Summary of Contents for LifeBook T901 Series

Reviews:

Brands by name

Popular brands