61
- Troubleshooting
The Tablet PC turned on
with a series of beeps and
the display is blank.
Power On Self Test detected
a failure which does not allow
the display to operate.
Contact your support representative.
The display goes blank by
itself after you have been
using it.
Power management timeouts
are set for short intervals and
you failed to notice the display
come on and go off again.
Push the Power/Suspend/Resume switch. (The display may
be shut off by Sleep Mode, Auto Suspend or Video Timeout)
The Tablet PC has gone into
Sleep or Hibernate mode
because you have not used it
for a period of time.
Push Power/Suspend/Resume switch. Check power man-
agement settings, or close applications and go to the Power
Savings menu of the setup utility to adjust timeout values
to suit your needs.
See “BIOS Setup Utility” on page 37.
The display has bright or
dark spots.
If the spots are very tiny and
few in number, this is normal
for a large LCD display.
This is normal; do nothing.
If the spots are numerous or
large enough to interfere with
your operation needs.
Display is faulty; contact your support representative.
Miscellaneous Problems
Error message displayed
on the screen during oper-
ation of an application.
Application software often has
its own set of error message
displays.
See your application manual and help displays screens for
more information. Not all messages are errors some may
simply be status.
Problem
Possible Cause
Possible Solutions