manualshive.com logo in svg

Fujitsu lifebook S6311, User Manual, Page: 48 / 61

Share
Download
Fujitsu lifebook S6311 User Manual Download Page 48

U s i n g   F i n g e r p r i n t   Au t h e n t i c a t i o n

37

Scrolling

The Fingerprint sensor now comes with a
scrolling function. Taking advantage of the
sensor’s technology, users will be able to scroll
up and down a document by swiping the finger
upwards to scroll up and swiping down to scroll
down.

• File & Folder encryption

In order to encrypt a file or folder, click on
the folder or file to encrypt, right click on your
mouse button, choose “Omnipass Encrypt
File(s)”. Omnipass will then perform the
encryption on the file selected. To decrypt,
click on the file and right click on your mouse
button and choose “Omnipass Decrypt
File(s)”. Omnipass will decrypt your file for
viewing.

Please take note that certain files and folder
in Windows are not possible to encrypt.

Please refer to Omnipass help file in your
LifeBook for further information.

Version information

Version information on fingerprint authentication
utility is displayed.

LB_GAURA (24-37) EN

13/11/06, 05:34 pm

37

Summary of Contents for lifebook S6311






























































Reviews:

No comments