Fujitsu Lifebook P771 Operating Manual Download

Page: 43 / 87

Working with the notebook

Removing the memory card

Memorycard

In order to protect your data, always follow the correct procedure
for removing the card outlined below.

You can stop the memory card via the corresponding icon in the task bar:

►

Left-click on the icon.

►

Select the card you want to stop and remove.

►

Press the Enter key.



Wait for the dialogue box which tells you that it is now safe to remove the memory card.

►

On devices with card locking: Press
on the storage card (1).

Memory card



The storage card is released and
can now be removed.

►

Pull the storage card out of the slot (2).

ExpressCards

Slot

ExpressCard

An ExpressCard slot enables operation of an ExpressCard/34 or ExpressCard/54.

Consult the documentation supplied by the ExpressCard’s manufacturer
and follow the instructions provided.

Never use force when installing or removing an ExpressCard.

Make sure that no foreign objects enter the ExpressCard slot.

Fujitsu Technology Solutions

Summary of Contents for Lifebook P771
























































































Search results

Summary of Contents for Lifebook P771

Reviews:

Related manuals for Lifebook P771

Brands by name

Popular brands

Fujitsu Lifebook P771, Operating Manual

Search results

Summary of Contents for Lifebook P771

Reviews:

Related manuals for Lifebook P771

Brands by name

Popular brands