Fujitsu LIFEBOOK N532 Operating Manual Download

Page: 66 / 82

Troubleshooting and tips

The notebook’s date or time is incorrect

Summertime

Time,daylightsavings

Timenotcorrect

Incorrectdate/time

Dateisincorrect

Bufferbattery,load

Cause

Troubleshooting

Time and date are incorrect.

►

With the

BIOS-Setup-Utility

, you can set the

date and time in the

main

menu.

If the time and date are still set incorrectly after
switching on the notebook.

►

Please contact your sales outlet or our
Hotline/Service Desk.

The notebook’s LCD screen remains blank

LCDscreen

LCDscreenistoodark

Cause

Troubleshooting

Monitor is switched off.

►

Press a key or touch the touchpad.

External monitor or television set connected.

►

Press the key combination to switch the
screen output, see

"Key combinations",

Page 23

The LCD screen is difficult to read

LCDscreen

Cause

Troubleshooting

ected glare

►

Turn the notebook or alter the tilt of the LCD
screen.

►

Increase the brightness of the screen.

The external monitor remains blank

Monitor

Cause

Troubleshooting

Monitor is switched off.

►

Switch the external monitor on.

Power saving has been activated (monitor is
blank).

►

Press any key to continue.

Brightness is set to dark.

►

Adjust the brightness of the monitor.

Screen output is set to the notebook’s LCD
screen

►

Press the key combination to switch the
screen output, see

"Key combinations",

Page 23

The external monitor’s power cable or data
cable is not connected properly.

►

Switch off the external monitor and the
notebook.

►

Check whether the power cable is plugged
properly into the external monitor and into
the power socket.

►

Check whether the data cable is properly
connected to the notebook and the external
monitor (if it is plugged in with a connector).

►

Switch on the external monitor and the
notebook.

Fujitsu Technology Solutions

Summary of Contents for LIFEBOOK N532



















































































Search results

Summary of Contents for LIFEBOOK N532

Reviews:

Related manuals for LIFEBOOK N532

Brands by name

Popular brands

Fujitsu LIFEBOOK N532, Operating Manual

Search results

Summary of Contents for LIFEBOOK N532

Reviews:

Related manuals for LIFEBOOK N532

Brands by name

Popular brands