Fujitsu LIFEBOOK N532 Operating Manual Download

Page: 54 / 82

Connecting external devices

Connecting an external SATA hard disk (eSATA)

An external SATA hard disk can be connected at the eSATA port. This allows you
to expand the internal hard disk capacity as you wish.

The length of the eSATA cable must not exceed 2 metres. Consult a specialist
dealer for advice on which eSATA data cable is suitable for your external eSATA
hard disk. Make sure that the hard disk has its own external power supply.

The data transfer rate is up to 2,400 Mbit/s.

eSATA

►

Connect the data cable to the external
device.

►

Connect the data cable to the eSATA port.

Device drivers

The eSATA hard disk is automatically recognised by your operating system and installed.

You will

nd more information in the documentation for the external SATA

hard disk and the operating system.

Safe removal of eSATA and USB devices

Always correctly remove the device according to the rules described below,
to ensure that none of your data is lost.

►

Left-click on the symbol to remove hardware safely.

►

Select the device you wish to shut down and remove.

►

Press the "Enter" key.



Wait for the dialogue box which tells you that it is now safe to remove the device.

Fujitsu Technology Solutions

Summary of Contents for LIFEBOOK N532



















































































Search results

Summary of Contents for LIFEBOOK N532

Reviews:

Related manuals for LIFEBOOK N532

Brands by name

Popular brands

Fujitsu LIFEBOOK N532, Operating Manual

Search results

Summary of Contents for LIFEBOOK N532

Reviews:

Related manuals for LIFEBOOK N532

Brands by name

Popular brands