Fujitsu lifebook e736 Operating Manual Download

Page: 46 / 110

Working with the notebook

Speakers and microphones

Microphone

Speakers

Bass speaker(subwoofer)

Volumecontrol

Information on the exact position of the speakers and microphone can be
found in

"Ports and controls", Page 12

Please refer to chapter

"Key combinations", Page 31

for information on setting the volume

and also enabling/disabling the speakers using key combinations.

If you attach an external microphone, the built-in microphone is disabled.

When you connect headphones or external speakers, the built-in speakers are disabled.

Information on connecting headphones and a microphone can be found
in

"Connecting external devices", Page 59

Wireless LAN/Bluetooth radio components

The installation of radio components not approved by Fujitsu will invalidate
the certi

cations issued for this device.

Switching the wireless components on and off

►

Press the

button to start the

WirelessSelector

The radio component indicator will be illuminated when one or more radio
components are switched on.

If you switch off the radio components, the wireless LAN antenna and
the Bluetooth module will also be switched off.

You can enable and disable the installed radio components individually
using the

WirelessSelector

program.

Details on using Wireless LAN can be found in the online help system
included in the Wireless LAN software.

You can

nd more information on how to use Bluetooth on the CD you

received with your Bluetooth software.

Further information on WLAN and Bluetooth

For further information about WLAN or Bluetooth, see "Appendix: Miscellaneous Information".

Fujitsu

Summary of Contents for lifebook e736















































































































Search results

Summary of Contents for lifebook e736

Reviews:

Related manuals for lifebook e736

Brands by name

Popular brands

Fujitsu lifebook e736, Operating Manual

Search results

Summary of Contents for lifebook e736

Reviews:

Related manuals for lifebook e736

Brands by name

Popular brands