Fujitsu lifebook e736 Operating Manual Download

Page: 31 / 110

Working with the notebook

Separate number block

Numeric keypad

Separatenumeric keypad

NumLock

LIFEBOOK E736 and LIFEBOOK E746 have virtual number blocks,
LIFEBOOK E756 has a separate number block.

The keyboard of your LIFEBOOK E756 notebook has a separate number block on the far right.

Key combinations

Keycombinations

The following description of key combinations applies to Windows operating systems. Some of the
following key combinations may not function in other operating systems or with certain device drivers.

Other key combinations are described in the relevant manuals supplied
with your application programs.

Key combinations are entered as follows:

►

Press the

rst key in the combination and keep it pressed.

►

While holding the

rst key down, press the other key or keys in the combination.

Combination

Description
Activate/deactivate keyboard backlight (optional)

On backlit keyboards, this key combination activates or deactivates
the backlight.

Fn+F2

keyboardbacklight

Switching the speakers on and off

This key combination switches your notebook’s speakers off and
on.

Fn+F3

Speakers

Fujitsu

Summary of Contents for lifebook e736















































































































Search results

Summary of Contents for lifebook e736

Reviews:

Related manuals for lifebook e736

Brands by name

Popular brands

Fujitsu lifebook e736, Operating Manual

Search results

Summary of Contents for lifebook e736

Reviews:

Related manuals for lifebook e736

Brands by name

Popular brands