Fujitsu Lifebook C2310 User Manual Download Page 86

Page: 86 / 116

L i f e B o o k C S e r i e s N o t e b o o k – S e c t i o n S i x

RESTORING YOUR
PRE-INSTALLED SOFTWARE

The Drivers and Applications Restore (DAR) CD
contains:

■

Sets of device drivers and Fujitsu utilities (in specific
directories) that are unique to your LifeBook note-
book configuration for use as documented below.

■

A link to the Drive Image Special Edition (DISE)
utility on your hard disk drive.

■

Read-me files that provide additional use information
for items on this CD-ROM

DRIVE IMAGE SPECIAL EDITION (DISE)

PowerQuest Drive Image Special Edition (DISE)
provides a way to restore your computer if you experi-
ence a hard disk crash or other system failure. Fujitsu has
used DISE to create an image of everything installed on
the computer at the time you purchased it. The image is
saved on a separate partition on the hard disk. You can
use DISE to restore the factory image and return your
computer to the state in which it was shipped.

Although it is not necessary, you can use DISE to store
additional image files you create. For example, if you
install several applications and save data files on your
hard disk, you can create a new image that includes them
and then save that image file on the hard disk. Then, in
the event of a hard disk failure, you can restore the image
that includes the applications and data files you use

Creating a Backup Image

You can create a system backup image of your C:\ drive
at any time. The C:\ partition must be a FAT, FAT32, or
NTFS partition, and it must be directly before the
backup partition on your hard disk.

There are two ways to implement the DISE utility: when
booting up the system, or from the desktop.

Creating a backup image when booting up

Before creating an image at boot-up, you must change
the boot-up priority in the BIOS so that the system will
go to the media drive first, rather than trying to boot-up
from the hard drive or an external floppy disk drive.

To change the boot-up priority:

1. Start your system and press [F2] when the Fujitsu

logo appears. You will enter the BIOS Setup Utility.

2. Using the arrow keys, go to the Boot menu.

3. Arrow down to the Boot Device Priority submenu

and press [Enter].

4. Arrow down to the CD-ROM drive in the list, and

press the space bar (or the + key) to move the CD-
ROM drive to the top of the list. (The system
attempts to boot from the devices in the order in
which they are listed.)

5. Press [F10], then click on [Yes] to exit the BIOS

Setup Utility and return to the boot process.

After you have changed the boot priority, you can create
a backup image when you are booting up:

1. Install the DAR CD in the drive prior to booting up.

When bootup begins, a message appears informing

you t

hat if you proceed, you will be able to:

■

Create a new backup of drive C

■

Restore a previous backup, or,

■

Restore the original factory image.

Note that creating a new backup will overwrite any
previous backups, and restoring a backup or factory
image will overwrite all information on the hard drive,
including saved files.

2. After you click

[Y]es

, you will be presented with two

options: [

Create New Backup

] and [

Restore

Backup

After you click [

Create New Backup

], follow the on-

screen instructions. By selecting [

Create New

Backup

], a new image will be written to your backup

partition. This will overwrite any previously created
image.

■

If the DAR CD is in the drive when you
boot up the system, and the Boot
Sequence is set in the BIOS to boot from
the CD drive first (see “Creating a backup
image when booting up” on page 80), a
message will appear informing you that if
you proceed, you will have a choice of:
creating a new backup of drive C:, restor-
ing a previous backup, or restoring the
original factory image.

Note that creating a new backup will
overwrite any previous backups, and
restoring a backup or factory image will
overwrite all information on the hard
drive, including saved files. If you wish to
install drivers or applications only from
the CD, remove the disk from the drive,
reboot the system, and insert the CD
after Wi

ndows has started.

If you have access to the internet, visit the
Fujitsu Support web site at
www.us.fujitsu.com/computers to check for
the most current information, drivers and
hints on how to perform recovery and
system updates.

Using the DISE feature will reduce the
amount of usable disk space on your hard
disk drive.

C2310.book Page 80 Friday, April 2, 2004 3:57 PM